2025 Honda Power Pumps WT20
- Year 2025
- Make Honda Power
- Model Pumps
- Engine GX160
2025 Honda Power Pumps WT20
2" trash pump
Features may include:
Heavy-duty 2" construction trash pump- Specially designed for job sites and applications where high volume trash water capacity is needed.
- The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
- Protects the pump, while offering a convenient tie down location for transport.
- The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
- The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
- A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
- The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
- The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
- High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
- The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
- Protects the pump by shutting the engine off when low oil is detected.
- The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
Engine
							Engine
							GX160
						
						
							Compression Ratio
							9.0:1
						
						
							Displacement
							163 cc
						
						
							Impeller
							Conical Cast Iron | Mechanical Seal: Silicon Carbide
						
						
							Bore
							2.7"
						
						
							Stroke
							1.8"
						
						Drivetrain
							Drive System
							Direct
						
						Operational
							Operating Conditions
							Priming time: 60 sec. @ 16.4 ft.
						
						
							Run Time Per Tankful
							Max Discharge: 1.5 hr
						
						Hydraulics
							Pump Type
							Trash Centrifugal Self-priming | Mechanical Seal: Silicon Carbide
						
						
							Maximum Pressure
							37 psi
						
						Dimensions
							Length
							24.4"
						
						
							Width
							18.1"
						
						
							Height
							18.3"
						
						
							Dimensions
							Total head lift: 85 ft. | Suction head lift: 26 ft. | Suction port diameter: 2" NPT | Discharge port diameter: 2" NPT | Solids handling: 13/16 inch.
						
						Capacities
							Discharge Capacity
							185 gal/min
						
						
							Fuel Capacity
							0.82 gal.
						
						Weights
							Dry Weight
							104 lbs.
						
						Features
							Features
							Volute: Rigid Mounted Cast Iron w/ Stainless Wear Plate | Strainer Part#: 78325-YG0-003
						
						Warranty
							Warranty
							Residential: 24 months | Commercial: 12 months
						
					